✿¸.•´ི♥All About Me♥ྀ `•.¸✿

My Photo
✿¸.•´ི♥Sexy Ash♥ྀ `•.¸✿
Mackay, QLD, Australia
Heya..Im Sexy Ash and im addicted to psp heehee.. ive been psping for about 5 or so yrs now and i love it.. Im a mum of a beautiful 5 yr old Hannah and she occupies most of my time. So i use psp to escape lol. Here ull find all my Tuts and Temps. If you have any questions please feel free to ask me!!
View my complete profile

✿¸.•´ི♥I CT For♥ྀ `•.¸✿

Photobucket Photobucket Photobucket

✿¸.•´ི♥TOU♥ྀ `•.¸✿

Please respect the time and effort that goes into these tutorials.

The creation, concept, and ideas of these tutorials is of my own imagination and design.

Should anything resemble another tutorial, this is only pure coincedence.

DO NOT copy my tutorials anywhere on the web or claim as your own!

I DO NOT give permission for my tutorials to be translated.

Please NO hotlinking, this is bandwidth theft!

DO NOT use my tutorials/ideas/supplies for commercial use or any other monetary gain







✿¸.•´ི♥Chat Box♥ྀ `•.¸✿

✿¸.•´ི♥Music♥ྀ `•.¸✿

Thursday, September 23, 2010

PostHeaderIcon Tag Template 42

Wednesday, September 15, 2010

PostHeaderIcon Halloween Town



This tutorial is for those that have a working knowledge of Psp.

Supplies needed:

Tube of choice.

I’m using the artwork of Elias Chatzoudis. You have to purchase a license to use his work at MPT

Halloween Town kit by Sarah and can be purchased at PMTWS

Template "Bitch Squad" from Cakes and you can find it at her blog

Ok lets gets started

Open temp and change canvas size to 700 by 700
Delete Wording.

Add your tube of choice onto your tag and place where you want it. Add Xero Radiance with these settings 46,93,6,217.
Duplicate tube layer and on this layer add Guassian Blur set on 3 and change blend mode to Softlight.
 Add a dropshodow original.

Fill in all your shapes with papers from your kit by selecting the shape - float - defloat - place paper over the shape - invert - delete - select none and delete original layer.

Then add glittered edges to all your shapes by after doing the above steps select the shape again - float - defloat - modify - contract by 2 - invert - add 100% noise and select none. Add Dropshadow.

Elements

Ground 3 - Resize and place into the middle circle - delete excess and add a dropshadow.

Kooky Grass - Place at the bottom of your tag.

Lantern - Place in the bottom left corner over the kooky grass - duplicate - mirror and add 50% noise into the eyes and mouth of both lanterns - add a dropshadow.

Label - Resize by 50% and rotate by 15 to the right and place in top right corner.

Bat - Resize by 50% and place in the top left corner.

Beadspill - Copy and paste onto your tag and place to the left over the angeled rectangle - duplicate and mirror - merge these layers together and drag until just above the rectangles.

Spooky Tree - Resize by 50% and place to the right - drag under pumpkin lantern.
Add your copyright and license number and name.

Then to save with a transperent background you just hide the white background - merge visable - delete the white background - then save as .png

Finished
Thankyou
This tut was created in September 2010

PostHeaderIcon SpellBound



This tutorial is for those that have a working knowledge of Psp.

Supplies needed:

Tube of choice.
I’m using the artwork of Keith Garvey. You have to purchase a license to use his work at MPT

Sit a Spell kit by Sarah and can be purchased at PMTWS

Collab Template 1 from Sylvie and Kristin and you can find it at sylvies blog

Ok lets gets started

Open temp and change canvas size to 700 by 700
Delete all wordart.

Add your tube of choice onto your tag and place where you want it. Add Xero Radiance with these settings 220,134,57,128. Add a dropshodow.

Fill in all your shapes with papers from your kit by selecting the shape - float - defloat - place paper over the shape - invert - delete - select none and delete original layer.

Then add glittered edges to all your shapes by after doing the above steps select the shape again - float - defloat - modify - contract by 2 - invert - add 100% noise and select none. Add Dropshadow.

Add a gradient into the 2 small squares and add a copy of your tube into the squares - invert - delete - select none and merge the tubes together - add Xero Radiance on default to the tubes and change the blend mode to Luminance (L) and add blinds 4,5,White to the gradiant background.

Take a haunted house image of choice and add it to the middle circle - invert - delete - select none and change blend mode to hardlight and lower opacity to 60%.

Elements

Tree - Resize by 50% and place in the bottom left corner.

Cauldron - Resize by 50% twice and place at the bottom of the tree.

Flower - Resize and place next to cauldron - duplicate and place on the other side.

Lantern - Resize by 50% twice and place in between the two flowers.

Bat - Resize by 50% and place in the top left corner.

Ribbon - Resize by 50% and place over top circle.

Stars 1 - Place onto your tag in the top corner - drag layer to the bottom - duplicate - mirror and flip.
Add your copyright and license number and name.

Then to save with a transperent background you just hide the white background - merge visable - delete the white background - then save as .png

Finished
Thankyou
This tut was created in September 2010

PostHeaderIcon Juicy Bits Template Three



Exclusive Tag Template
-xx-

PostHeaderIcon Crafty Chick Exclusive Halloween Tag Templates

A halloween set exclusively at
-xx-

PostHeaderIcon Juicy Bits Template Two

You can grab this temp exclusively from the fab forum
-xx-




Tuesday, September 14, 2010

PostHeaderIcon Juicy Bits Template One

You can grab this temp exclusively from the fab forum
-xx-

PostHeaderIcon Brrr



This tutorial is for those that have a working knowledge of Psp.

Supplies needed:

Tube of choice.

I’m using the artwork of Barbara Jensen. You have to purchase a license to use her work Here

Brrr Kit by Sarah and you can purchase it at PMTWS

Template 347 from Missy and you can find it at her blog Divine Intentionz

Ok lets gets started

Open temp and change canvas size to 700 by 700
Delete Wordart.

Add your tube of choice onto your tag and place where you want it. Delete excess. Add a dropshodow.

Fill in all your shapes with papers from your kit by selecting the shape - float - defloat - place paper over the shape - invert - delete - select none and delete original layer.

Then add glittered edges to all your shapes by after doing the above steps select the shape again - float - defloat - modify - contract by 2 - invert - add 100% noise and select none. Add Dropshadow.

Elements

Snow overlay - Resize by 50% and place in the films, Add a copy of your tube and delete excess on both layers. Change blend mode to the tubes to Luminance (L).

Stitches frame - Resize by 70% and place over the top of the right circle - duplicate and mirror - plave over the top of the bottom left circle.

Sparkle cluster - Resize by 80% and place over the middle circle - drag under the two half circles.

Icicles - Add to the same circles as the stitches frame - delete excess.

Snowflake jem - Resize by 50% and place in the bottom corner over the film - duplicate - mirror - flip.

Trees - Resize by 50% twice and arrange onto your tag.

Bow 1 - Resize by 50% and place where mine is.

Brr wordart - Resize by 50% and then by 80% and place at the bottom middle of your tag.

Add your copyright and license number and name.

Then to save with a transperent background you just hide the white background - merge visable - delete the white background - then save as .png

Finished
Thankyou
This tut was created in September 2010
Sunday, September 5, 2010

PostHeaderIcon Cool Rebel


This tutorial is for those that have a working knowledge of Psp.

Supplies needed:

Tube of choice.

I’m using the artwork of Keith Garvey. You have to purchase a license to use his work Here

Cool kit by Tamie and can be purchased at Addictive Pleasures

Template 367 By Missy and you can grab it from Divine Intentionz

Ok lets gets started

Open temp and change canvas size to 700 by 700

Add your tube of choice onto your tag and place where you want it. Add Xero Radiance with these settings 242,62,136,143. Add a dropshodow.

Fill in all your shapes with papers from your kit by selecting the shape - float - defloat - place paper over the shape - invert - delete - select none and delete original layer.
Then add glittered edges to all your shapes by after doing the above steps select the shape again - float - defloat - modify - contract by 2 - invert - add 100% noise and select none. Add Dropshadow.

Film - Copy and paste film onto your tag and resize by 90% - place over the original film and then delete original. Select inside the film and add a gradient and tube of choice - invert and delete excess tube - select none and add Xero Radiance on default to the tubes and change the blend mode to Luminance (L) and lower the opacity to 70 - then add blinds 4,10,white to the gradient background.

Elements

Stars - Resize by 90% and place in the bottom corner - add 100% noise and drag layer to the bottom. Duplicate - flip and mirror.

Ribbon 4 - Resize by 50% and place over the middle rectangle.

Ribbon 7 - Resize by 50% and place over to the left on the film.

Stud - Resize and place over Ribbon 7.

Glassbrad - Resize by 50% twice and place in the bottom right corner.

Add any extra elements you want to make the tag yours :)

Add your copyright and license number and name.

Then to save with a transperent background you just hide the white background - merge visable - delete the white background - then save as .png

Finished
Thankyou
This tut was created in September 2010

PostHeaderIcon Sk8er Chick



This tutorial is for those that have a working knowledge of Psp.

 Supplies needed:

Tube of choice.
I’m using the artwork of Elias Chatzoudis. You have to purchase a license to use his work Here

 Sk8er Girl kit by Tamie and can be purchased at Addictive pleasures

 Template 1 from Salsa and you can find it at her blog Charmed Vixenz

 Ok lets gets started

 Open temp and change canvas size to 700 by 700

 Add your tube of choice onto your tag and place where you want it. Add Xero Radiance with these settings 2226,19,51,164. Add a dropshodow.

 Fill in all your shapes with papers from your kit by selecting the shape - float - defloat - place paper over the shape - invert - delete - select none and delete original layer.

 Then add glittered edges to all your shapes by after doing the above steps select the shape again - float - defloat - modify - contract by 2 - invert - add 100% noise and select none. Add Dropshadow.

 Elements

 Skull 3 - Resize by 50% and place in top right corner of the top rectangle - duplicate and mirror.

 String - Colourise and place above wording.

 Beads - Resize by 50% and place to the top left and drag layer under the top rectangle - duplicate and mirror.

 Star - Resize by 50% and duplicate - then arrange in the top corner - merge together - duplicate and mirror.

 Add your copyright and license number and name.

 Then to save with a transperent background you just hide the white background - merge visable - delete the white background - then save as .png

 Finished
Thankyou
This tut was created in September 2010


Saturday, September 4, 2010

PostHeaderIcon Tag Template 41


PostHeaderIcon Tag Template 40



PostHeaderIcon Tag Template 39


PostHeaderIcon Tag Template 38


✿¸.•´ི♥Blinkie♥ྀ `•.¸✿

Photobucket

✿¸.•´ི♥Contact Me♥ྀ `•.¸✿

If you have any troubles or want to send me your results to my tuts then please feel free to email me and ill get back to you as soon as i can. Ty ashleymarlin@bigpond.com

✿¸.•´ི♥Forums I Love♥ྀ `•.¸✿

Photobucket Photobucket Photobucket Photobucket

✿¸.•´ི♥Blog Buds♥ྀ `•.¸✿

Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket

✿¸.•´ི♥Followers♥ྀ `•.¸✿