✿¸.•´ི♥All About Me♥ྀ `•.¸✿

My Photo
✿¸.•´ི♥Sexy Ash♥ྀ `•.¸✿
Mackay, QLD, Australia
Heya..Im Sexy Ash and im addicted to psp heehee.. ive been psping for about 5 or so yrs now and i love it.. Im a mum of a beautiful 5 yr old Hannah and she occupies most of my time. So i use psp to escape lol. Here ull find all my Tuts and Temps. If you have any questions please feel free to ask me!!
View my complete profile

✿¸.•´ི♥I CT For♥ྀ `•.¸✿

Photobucket Photobucket Photobucket

✿¸.•´ི♥TOU♥ྀ `•.¸✿

Please respect the time and effort that goes into these tutorials.

The creation, concept, and ideas of these tutorials is of my own imagination and design.

Should anything resemble another tutorial, this is only pure coincedence.

DO NOT copy my tutorials anywhere on the web or claim as your own!

I DO NOT give permission for my tutorials to be translated.

Please NO hotlinking, this is bandwidth theft!

DO NOT use my tutorials/ideas/supplies for commercial use or any other monetary gain







✿¸.•´ི♥Chat Box♥ྀ `•.¸✿

✿¸.•´ི♥Music♥ྀ `•.¸✿

Saturday, May 29, 2010

PostHeaderIcon Kinky

This tutorial is for those that have a working knowledge of Psp.

Supplies needed:

Tube of choice.

I’m using the artwork of Barbara Jensen. You have to purchase a license to use her work Here

PeepShow collab kit by TammyKat and Sarah and can be purchased at Pimp my Tags with Scraps

Template # 338 made by Missy and you can download it at Divine Intenionz

Ok lets gets started
Open temp and change canvas size to 700 by 700

Add your tube and add a dropshadow.

Fill in all your shapes with papers from your kit by selecting the shape - float - defloat - place paper over the shape - invert - delete - select none and delete original layer.

Then add glittered edges to all your shapes by after doing the above steps select the shape again - float - defloat - modify - contract by 4 - invert - add 100% noise and select none. Add Dropshadow.

Add tubes into the bottom frame and the two single squares on both the left and the right.

Frame - Change the blend mode to the tubes to hardlight

Single Squares - Add Xero Radiance on default to the tunes and change the blend mode to luminance - lower the opacity to 60% and then add blinds 3,10 black.

Elements

Circle frame - Place onto your tag over the middle circle and drag the layer down until its just ontop of the top circle.

Black frame - place over the left side of the large square at the bottom - duplicate - mirror and delete the excess that overhangs - merge together.

Wordart - "sexy" and "girls" resize by 50% and place on either side of the bottom frame.

Censor ribbon - resize by 90% twice and drag below your tube - place over the two single squares.

Pink Flower - resize by 50% and place under the left side of the single squares - duplicate and resize by 80% - place just to the right of the original flower - merge together - duplicate and mirror.

Peepshow Sign - Resize by 50% twice and rotate left by 5 and place where mine is - drag below your tube.

Add your copyright and license number and name.

Then to save with a transperent background you just hide the white background - merge visable - delete the white background - then save as .png

Finished
Thankyou
This tut was created in May 2010

PostHeaderIcon Bad Bitch

This tutorial is for those that have a working knowledge of Psp.

Supplies needed:

Tube of choice.

I’m using the artwork of Ismael Rac. You have to purchase a license to use his work at AMI

Bad Girls Club kit by TammyKat and can be purchased at Pimp my Tags with Scraps

Template # 31 made by Myself

Ok lets gets started

Open temp and change canvas size to 700 by 700

Delete the two thin rectangles.

Fill in all your shapes with papers from your kit by selecting the shape - float - defloat - place paper over the shape - invert - delete - select none and delete original layer.

Then add glittered edges to all your shapes by after doing the above steps select the shape again - float - defloat - modify - contract by 4 - invert - add 100% noise and select none. Add Dropshadow.

Copy and paste your tube of choice and add Xero-Radiance 43,83,85,147 and add a dropshadow.

Elements

Purple Tripleframe - copy and paste onto your tag and place over the 3 small squares in the middle of your tag - add a close up tube into the frame - invert and delete - then add Xero Radiance on default to the tubes- change blend mode to softlight.

Staples - resize by 50% twice and place over the top left corner of the frame - duplicate - mirror - duplicate and flip.

Frame 1 - Copy and paste onto your tag and drag below the middle triple frame - add closeup tube and delete excess - add Xero Radiance on default and add blinds 3,10 black.

Skull 2 - resize by 50% twice and colourise to match your tag - place where you want on yout tag.

Add your copyright and license number and name.

Then to save with a transperent background you just hide the white background - merge visable - delete the white background - then save as .png

Finished
Thankyou
This tut was created in May 2010


PostHeaderIcon Addicted to You

This tutorial is for those that have a working knowledge of Psp.

Supplies needed:

Tube of choice.
I’m using the artwork of Keith Garvey. You have to purchase a license to use his work at MPT

Come and Get It kit by Sarah and can be purchased at Pimp my Tags with Scraps

Template # 84 made by Yvette and you can download it at Essence of Creativity

Ok lets gets started

Open temp and change canvas size to 700 by 700

Them take your tube and place her to the left of your tag and add Xero Radiance on default and add a dropshadow.

Fill in all your shapes with papers from your kit by selecting the shape - float - defloat - place paper over the shape - invert - delete - select none and delete original layer.

Then add glittered edges to the main rectangle by after doing the above steps select the shape again - float - defloat - modify - contract by 4 - invert - add 100% noise and select none. Add Dropshadow.

Add a closeup tube to the frame section - invert and delete excess - select none and add Xero Radiance on default - then change the blend mode to Luminance and lower the opacity to 50% - then on the paper background add Penta's Jeans set on 14,5.

Then on the thin rectangles add Penta's Jeans set on 62,4.

Elements

Flowers - resize 2 different flowers by 50% and arrange at the bottom right of your tag.

Ribbon 2 - Resize by 50% and mirror - drag the layer under the flowers and place at the bottom right.

Tag 2 - Resize by 80% twice and mirror - place at the top right corner and add some wording to the tag.

Lolliepops - Rotate by 10 and resize by 50% - duplicate and mirror - arrange together and then merge together. Add them to the floer arrangement and drag layer under the flowers.

Add your copyright and license number and name.
Then to save with a transperent background you just hide the white background - merge visable - delete the white background - then save as .png.

Finished

Thankyou
This tut was created in May 2010

PostHeaderIcon Beautiful

This tutorial is for those that have a working knowledge of Psp.

Supplies needed:
Tube of choice.
I’m using the artwork of Sonia Roji. You have to purchase a license to use her work at MPT
Cheeky kit by Sarah and can be purchased at Pimp my Tags with Scraps

Ok lets gets started
Open a new canvas 700 by 700

Copy and paste frame 1 onto your tag - select all - float - defloat - contract by 3 - invert and add 100% noise.
Place your tube onto the frame and place to the left - duplicate and on this layer add guassian blur set on 3 - change the blend mode to softlight - then add a dropshadow to the original - colourise the underwear.
Then add a paper into the frame - invert and delete.
Add a tube into the right square of the frame - invert and delete excess - then add Xero-Radiance on default - change blend mode to hardlight and lower the opacity to 40% - duplicate and mirror.
Tag Back 1 - Resize by 80% and rotate right by 10 - place to the right and drag to the bottom of all your layers.
Scattered Flowers - copy and paste onto your tag - place at the top and delete the flowers you dont want.
Add a ric rac to the botton of your frame - duplicate and rotate one by 10 - merge together.
Then open the string element and duplicate - on the bottom layer colourise to match your tag - then on the top layer change the blend mode to screen - merge together and copy - paste onto your tag - place at the bottom and place the flower section over the end of the ric racs.
Button - resize and place over the bow on the frame.
Leaves - resize by 50% and place at the bottom right of the frame - duplicate and mirror - merge together and drag to the bottom - colourise - select all - float - defloat - modify - contract by 3 - invert - add 100% noise
Add your copyright and license number and name.
Then to save with a transperent background you just hide the white background - merge visable - delete the white background - then save as .png
Finished
Thankyou
This tut was created in May 2010

Friday, May 21, 2010

PostHeaderIcon Addiction



This tutorial is for those that have a working knowledge of Psp.

Supplies needed:

Tube of choice.
I’m using the artwork of Andres Rey. You have to purchase a license to use their work at MPT

Sticky Sweet kit by Cora and can be purchased at Pimp my Tags with Scraps

Template # 287 made by Missy and you can download it at Divine Intentionz

Ok lets gets started

Open temp and change canvas size to 700 by 700

Then take your tube and place her to the left of your tag and add Xero Radiance on default and drag under the wordart.
Fill in all your shapes with papers from your kit by selecting the shape - float - defloat - place paper over the shape - invert - delete - select none and delete original layer.

Then add glittered edges to all your shapes by after doing the above steps select the shape again - float - defloat - modify - contract by 4 - invert - add 100% noise and select none. Add Dropshadow.

Elements

Ribbon 3 - Resize by 80% and place along the bottom of your temp.

Lolliepop - Resize by 50% and place on your temp - duplicate and rotate one by 10 left and the other 10 right - arrange to the left and drag under your tube.

Cupcake - resize by 50% twice and add noise to the pink bits and place in the bottom right corner.

Cherries - Resize by 50% twice and place on the top of the thin vertical rectangle.
Bow 1 - Resize by 50% twice and mirror - then place over the stem of the cherries.

Glitter Circle - Resize by 80% and place towards the top cirlce off to the left a little - duplicate - mirror and flip.

Butterfly - resize by 50% twice and sharpen - rotate 10 right and then place where mine is.

Add your copyright and license number and name.

Then to save with a transperent background you just hide the white background - merge visable - delete the white background - then save as .png
Finished
Thankyou

This tut was created in May 2010
Thursday, May 20, 2010

PostHeaderIcon Sugar Rush




This tutorial is for those that have a working knowledge of Psp.

Supplies needed:

Tube of choice.
I’m using the artwork of Elias Chatzoudis. You have to purchase a license to use his work at MPT

Sugar Rush kit by Tammykat and can be purchased at Pimp my Tags with Scraps

Template # 322 made by Missy and you can download it at Divine Intentionz

Ok lets gets started

Open temp and change canvas size to 700 by 700

Delete all the wordart.

Them take your tube and place her in the middle of your tag and duplicate - on this copy add Guassian Blur set on 3 and change the blend mode to softlight and then on the original add Xero Radiance with these settings 206,55,48,152 and add a dropshadow.

Fill in all your shapes with papers from your kit by selecting the shape - float - defloat - place paper over the shape - invert - delete - select none and delete original layer.

Then add glittered edges to all your shapes by after doing the above steps select the shape again - float - defloat - modify - contract by 4 - invert - add 100% noise and select none. Add Dropshadow.

Then add your own words to the thin rectangle where the old words were.

Elements

Blue Ruffel - Resize by 50% and place over the bottom thin rectangle and then drag that layer under the heart.

Arrange some Hearts from your kit over the heart thats in the bottom corner and when your happy delete the original heart.

Circle Frame *pink* - place on your tag and then drag the layer down until its just ontop of the middle circle.

Ribbon 2 - Take two different coloured ones and place them on your tag - resize by 50% and place one on the left top of the middle rectangle - then place the other on the other side - drag under your tube.

Black button with ribbon - Resize by 50% and place over the corner of the above ribbon - duplicate and mirror.

Flowers - add two different coloured flowers and resize by 50% - sharpen - then arrange at the top of the right circle - merge together and duplicate - mirror and flip.

Add your copyright and license number and name.
Then to save with a transperent background you just hide the white background - merge visable - delete the white background - then save as .png
Finished

Thankyou
This tut was created in May 2010


Wednesday, May 19, 2010

PostHeaderIcon Be Beautiful



This tutorial is for those that have a working knowledge of Psp.

Supplies needed:

Tube of choice.
I’m using the artwork of Ismael Rac. You have to purchase a license to use his work at AMI

Be You Collab kit by Sarah and TammyKat can be purchased at Pimp my Tags with Scraps

Template # 1 made by Me found at the Creative Misfits Creations blog Here

Ok lets gets started

Open temp and change canvas size to 700 by 700

Delete wordart and the film/film background.

Take your tube and place her in the middle of your tag and add Xero Radiance with these settings 190,73,83,169 and add a dropshow. Then delete the excess at the bottom.
Fill in all your shapes with papers from your kit by selecting the shape - float - defloat - place paper over the shape - invert - delete - select none and delete original layer.

Then add glittered edges to all your shapes by after doing the above steps select the shape again - float - defloat - modify - contract by 4 - invert - add 100% noise and select none. Add Dropshadow.

Select the two tall rectangles on either side of the tag and after youve added a paper add a close up tube of choice and place in the left rectangle - invert - delete - select none - duplicate - mirror - merge together and add xero radiance on default - change blend mode to hardlight and lower the opacity to 60% - then on your paper add weave set on 1,12,1 and a colour from your tube.
Elements

Frame 2 - Copy and paste onto your tag and place to the left over raster 6 - delete the excess that shows on the right - duplicate and mirror - merge together and drag layer under the middle square - then delete raster 6. Fill the frame with a paper and close up tube - invert and delete - merge the tubes in the frame together and add xero radiance on default and lower opacity to 60% then add blinds 3,10 black to the paper background.

Flowers 1 - Resize by 50% and place over the left side of the thin rectangle - duplicate and mirror - merge together and sharpen. Add a dropshadow.

String Deco - resize by 50% and flip - add 30% noise and place on the right side of the middle square - duplicate and mirror.

Staples - resize by 50% twice and place at the top of the string on the above element - duplicate and place at another point on the string - merge together and duplicate - mirror.

Beads - Resize by 50% and place to the right under the flower element - duplicate and mirror.

Round frame 1 - Resize by 50% and place to the right and hang it off the square frame - add a tube into the middle of the frame invert - delete and colourise to match tag. Merge frame and tube together and duplicate - mirror.

Glitter line - copy and paste onto your tag and place under the thin rectangle - drag layer to the bottom.

Add flowers of choice from your kit.

Lastely add some wordart.

Add your copyright and license number and name.

Then to save with a transperent background you just hide the white background - merge visable - delete the white background - then save as .png
Finished
Thankyou
This tut was created in May 2010

Tuesday, May 18, 2010

PostHeaderIcon Bada Bang



This tutorial is for those that have a working knowledge of Psp.

Supplies needed:

Tube of choice.
I’m using the artwork of Ismael Rac. You have to purchase a license to use his work at AMI

Bada Bing Collab kit by Sarah and TammyKat can be purchased at Pimp my Tags with Scraps

Template # 34 made by Me found at my blog

Ok lets gets started

Open temp and change canvas size to 700 by 700

Delete the dotted rectangle

Take your tube and place her to the right of your tag and add Xero Radiance with these settings 243,73,38,161.
Fill in all your shapes with papers from your kit by selecting the shape - float - defloat - place paper over the shape - invert - delete - select none and delete original layer.

Then add glittered edges to all your shapes by after doing the above steps select the shape again - float - defloat - modify - contract by 4 - invert - add 100% noise and select none. Add Dropshadow.

Select inside the square on the left - copy and paste a close up tube into the square - invert and delete - select none and add Xero Radiance on default - change blend mode to hard light and lower opacity to 60% - add blinds 3,10,black to the paper background in the square.

Elements
Frame 1 - Place on your tag and mirror - then resize by 80% and rotate to the left by 10 - place over the square on the left.

Flowers - Resize by 50% and arrange in the bottom left corner of the frame.

Slider - resize by 50 twice and rotate to the left by 90 - place at the top of the frame - duplicate - flip and place the otherone on the bottom of the frame - merge together and sharpen

Labels - take the 'sexy' and 'naughty' labels and resize by 50% - then rotate one to the left by 10 - arrange under the top flower of the flower arrangements.

Add any extra elements of choice from your kit
Add your copyright and license number and name.

Then to save with a transperent background you just hide the white background - merge visable - delete the white background - then save as .png
Finished
Thankyou
This tut was created in May 2010
Sunday, May 16, 2010

PostHeaderIcon Guitar Girl

This tutorial is for those that have a working knowledge of Psp.
Supplies needed:
Tube of choice.
I’m using the artwork of Sonia Roji. You have to purchase a license to use her work at MPT

Guitar Star kit is made by my awsome friend Tamie and you can grab it for free at Addictive Pleasures

Template #33 made by Me

Ok lets gets started

Open temp and change canvas size to 700 by 700

Take your tube and place her in the middle of your tag - duplicate and on this layer Guassian blur set on 3 and change then blend mode to soft light. Then on the original add Xero Radiance with these settings 156,66,14,224 and add a dropshadow.
Fill in all your shapes with papers from your kit by selecting the shape - float - defloat - place paper over the shape - invert - delete - select none and delete original layer.

Then add glittered edges to all your shapes by after doing the above steps select the shape again - float - defloat - modify - contract by 4 - invert - add 100% noise and select none. Add Dropshadow.

Film - fill in the film squares with tubes - invert and delete - select none - merge the tubes in the film together and add xero radiance on default - then change the blend mode to multiply and add blinds 3,10 black.

Elements

Wire 3 - copy and paste onto your tag - resize by 80% and drag to the bottom - add 50% noise and a dropshadow.

Chain 4 - Resize by 50% and place over the right square - duplicate and mirror - merge together and drag below your main tube.

Sparkle Wings - Resize by 80% twice and place just under the main tube - sharpen twice and add a dropshadow.

Barbed Wire - Resize by 90% and place at the bottom of the film - duplicate and place that one at the top of the film.

Rose - Resize by 50% twice and place at the right side of the film - duplicate and mirror.

Bow 3 - Resize by 50% three times and place over the stem of the rose - duplicate and mirror.

Add any extra elements you want to make the tag your own :)

Add your copyright and license number and name.

Then to save with a transperent background you just hide the white background - merge visable - delete the white background - then save as .png

Finished
Thankyou
This tut was created in May 2010


Saturday, May 15, 2010

PostHeaderIcon Bad Girls




This tutorial is for those that have a working knowledge of Psp.

Supplies needed:

Tube of choice.

I’m using the artwork of Elias Chatzoudis. You have to purchase a license to use his work at MPT

Bad Girl kit is made by my awsome friend Tamie and can be purchased at Addictive Pleasures

Template #329 made by Missy - download from her blog Divine Intentionz

Ok lets gets started

Open temp and change canvas size to 700 by 700

Delete the wordart and thin rectangles 1 and 2
Them take your tube and place her in the middle of your tag and add Xero Radiance with these settings 207,118,91,207 and add a dropshadow.
Fill in all your shapes with papers from your kit by selecting the shape - float - defloat - place paper over the shape - invert - delete - select none and delete original layer.

Then add glittered edges to all your shapes by after doing the above steps select the shape again - float - defloat - modify - contract by 4 - invert - add 100% noise and select none. Add Dropshadow.

Elements

Ribbon - resize by 50% and place on top of the left rectangle

Screw- Resize by 50% three times and duplicate twice - place over the bows in the ribbon.

Fan - copy and paste onto your tag and place under your tube.

Wire - Copy and paste onto your tag and place in the middle then drag this layer under all the circles.

Streamer - resize by 50% and flip - then place at the bottom left of the rectangle - duplicate and mirror.

Bow 2 - resize by 50% twice and place over your streamer - duplicate and mirror.

Buckle Ribbon - Resize by 50% and place under the two bows (2).

Sign 2 - resize by 50% twice and sharpen - then rotate 10.00 to the left and place where mine is.

hand cuffs - resize by 50% twice and place at the top corner.

Add your copyright and license number and name.

Then to save with a transperent background you just hide the white background - merge visable - delete the white background - then save as .png

Finished
Thankyou
This tut was created in May 2010

PostHeaderIcon Come Get it




This tutorial is for those that have a working knowledge of Psp.

Supplies needed:

Tube of choice.
I’m using the artwork of Elias Chatzoudis. You have to purchase a license to use his work at MPT

Come and Get It kit by Sarah and can be purchased at Pimp my Tags with Scraps

Template # 353 made by Missy and you can download it at Divine Intentionz

Ok lets gets started

Open temp and change canvas size to 700 by 700

Delete all the hearts.

First off take Frame 1 from your kit and place it over the 3 small squares in the middle of the temp and then delete the 2 small squares and the frames sorounding them - Then colourise the Frame element to match your tag.

Them take your tube and place her in the middle of your tag and add Xero Radiance with these settings 191,29,5,244.
Fill in all your shapes with papers from your kit by selecting the shape - float - defloat - place paper over the shape - invert - delete - select none and delete original layer.

Then add glittered edges to all your shapes by after doing the above steps select the shape again - float - defloat - modify - contract by 4 - invert - add 100% noise and select none. Add Dropshadow.

Elements

Frame 1 - Add tubes and a gradiant to the inside of the frame - then add Xero Radinace on default to the tubes in the frame - change the blend mode to Luminance (L) and lower the opacity to 60% - then add Blinds 3,20 black to the gradiant background.

Tag 2 - resize by 80% twice and place in the left top corner on the frame - add a copy of your tube into the white tag - invert - delete and lower opacity to 50%.

Ribbon 1 - resize by 50% and place in top right corner on the two circles.

Flower 1 - resize by 50% twice and arrange on ribbon 1.

Lolliepops - Resize by 50% and duplicate - rotate one by 10% right and the other by 20% left and arrange at the bottom right of the frame.

Button 2 - resize by 50% twice and place where mine of over the sticks of the lolliepops.

Flower 1 and 3 - Colourise to match your tag - resize by 50% twice and arrange at the bottom of the top circle.

String deco 1 - resize by 50% and place in the middle of the flower arrangement.

Add your copyright and license number and name.

Then to save with a transperent background you just hide the white background - merge visable - delete the white background - then save as .png
Finished
Thankyou

This tut was created in May 2010
Friday, May 14, 2010

PostHeaderIcon Cheeky


This tutorial is for those that have a working knowledge of Psp.

Supplies needed:

Tube of choice.

I’m using the artwork of Elias Chatzoudis. You have to purchase a license to use his work at MPT

Cheeky kit by Sarah and can be purchased at Pimp my Tags with Scraps

Template # 31 made by myself

Ok lets gets started
Open temp and change canvas size to 700 by 700

Delete the 3 small squares and 2 thin rectangles.

Copy and paste your tube onto your tag and place it in the middle and add Xero Radiance 108,49,71,201 and add a dropshadow.

Fill in all your shapes with papers from your kit by selecting the shape - float - defloat - place paper over the shape - invert - delete - select none and delete original layer.

Then add glittered edges to all your shapes by after doing the above steps select the shape again - float - defloat - modify - contract by 4 - invert - add 100% noise and select none. Add Dropshadow.

Elements
Frame 3 - Copy and paste onto your tag and resize by 80% - place in the middle of the top circle and drag under your tube. Then add a paper and tube into the squares of the frame. Add Xero Radiance on default to the tubes in the frame and change blend mode to Luminance (L).

Stitches 2 - Resize by 80% and place over the top circle - drag layer under the frame.

Ribbon 1 - Resize by 80% and place in the top left corner on the circle.

Button - Resize by 50% three times and place over the knot of the bow.

Ric Rac - Resize both by 50% and arrange at the bottom left of the frame - rotate one by 5 left.

Vine 1 - Resize by 50% and flip - then place on the left hand side of the frame - duplicate and mirror.
Add your copyright and license number and name.
Then to save with a transperent background you just hide the white background - merge visable - delete the white background - then save as .png
Finished
Thankyou
This tut was created in May 2010
Thursday, May 13, 2010

PostHeaderIcon Take a Picture


This tutorial is for those that have a working knowledge of Psp.

Supplies needed:

Tube of choice.

I’m using the artwork of Keith Garvey. You have to purchase a license to use his work at MPT

Girls on Film kit by TammyKat and can be purchased at Pimp my Tags with Scraps

Template # 115 made by Yvette found at Essence of Creativity

Ok lets gets started
Open temp and change canvas size to 700 by 700

Copy and paste your tube onto your tag and place in the middle - add Xero Radiance 247,127,47,182 and add a dropshadow. Delete the excess at the bottom.

Fill in all your shapes with papers from your kit by selecting the shape - float - defloat - place paper over the shape - invert - delete - select none and delete original layer.
Films
Select the 2 single film squares and add a paper - invert - delete - select none and delete original layer. Then select in the middle of those film and add a paper and tube of choice - invert - delete - select none - on the tubes change the blend mode to Luminance (L) and add blinds 3,10 black.

Repeat the above steps to the long film except on the tubes add Xero Radiance on default and change blend mode to Luminance (L) and lower opacity to 90%.

Elements

Eyelet Ribbon - Rotate by 90% left and resize by 80% twice and place over the left end on the long film - duplicate - mirror and merge together. Then use the eraser tool and delete the film inside the eyelets - add d dropshadow to the eyelet ribbons.

Flowers - Resize by 50% and arrange at the bottom of your tube - add a dropshadow.

Crem Bow - Resize by 50% twice and place to the right of the flowers - duplicate - mirror - merge together and add a dropshadow.

Blue Button - resize by 50% and place to the left where mine is - duplicate - mirror.

Black Bow - resize by 50% twice and place over the left button - duplicate and mirror

Add a diamond of choice.

Add your copyright and license number and name.

Then to save with a transperent background you just hide the white background - merge visable - delete the white background - then save as .png

Finished
Thankyou

This tut was created in May 2010
Wednesday, May 12, 2010

PostHeaderIcon Bad Girls Club



This tutorial is for those that have a working knowledge of Psp.

Supplies needed:

Tube of choice.
I’m using the artwork of Elias Chatzoudis . You have to purchase a license to use his work at MPT

Bad Girls Club kit by TammyKat and can be purchased at Pimp my Tags with Scraps

Template # 2 from my set Here

Ok lets gets started

Open temp and change canvas size to 700 by 700

Delete wordart and hearts.

Fill in all your shapes with papers from your kit by selecting the shape - float - defloat - place paper over the shape - invert - delete - select none and delete original layer.

Then add glittered edges to all your shapes by after doing the above steps select the shape again - float - defloat - modify - contract by 4 - invert - add 100% noise and select none. Add Dropshadow.
Copy and paste your tube of choice and add Xero-Radiance 244,96,52,157 and add a dropshadow.

Then select the two large circles on either sides of the main circle and copy and paste a close up tube into the right circles - invert - delete - select none - duplicate - mirror and merge together - add Xero Radiance on default and lower opacity to 50%.

Select the inside of the middle square - copy and paste a copy of your tube - invert - delete - select none - lower opacity to 60% and add Xero-Radinace on default.

Elements

Purple Ribbon - Resize by 50% - select all - float - defloat - modify - contract by 2 - invert and add 100% noise and select none - add dropshadow. Place to the left on the rectangle - duplicate - mirror - merge together and drag under the middle square.

Staples - resize by 50% twice and place over the bow on the ribbon - duplicate - mirror.

BeadSpill - copy and paste onto your tag and place in the top right corner - duplicate - mirror - merge together - duplicate again and flip - merge together and drag layer to the bottom.

Frame 1 - Copy and paste onto your tag and drag below the middle squares - then use your eraser tool to get rid of the bits your dont want. I erased the bottom paint splatter.

Pills - resize by 50% twince and arrange on the left.

Flower Heart - Resize by 80% and place where mine is.

Add your copyright and license number and name.

Then to save with a transperent background you just hide the white background - merge visable - delete the white background - then save as .png

Finished
Thankyou

This tut was created in May 2010

PostHeaderIcon Kitty Kitty


This tutorial is for those that have a working knowledge of Psp.

Supplies needed:

Tube of choice.
I’m using the artwork of Keith Garvey. You have to purchase a license to use his work at MPT

Here Kitty Kitty kit by TammyKat and can be purchased at Pimp my Tags with Scraps

Template # 1 from my set Here

Ok lets gets started
Open temp and change canvas size to 700 by 700

Delete wordart and the two black rectangles.
Copy and paste your tube onto your tag and place it in the middle - add dropshadow.

Fill in all your shapes with papers from your kit by selecting the shape - float - defloat - place paper over the shape - invert - delete - select none and delete original layer.

Then add glittered edges to all your shapes by after doing the above steps select the shape again - float - defloat - modify - contract by 4 - invert - add 100% noise and select none. Add Dropshadow.

Film - Colourise the film to match your tube. Then add your tube into the squares of the film - invert - delete - select none - merge tubes in the frame together - add Xero-Radiance 173,214,223,168 and lower the opacity to 70%.

Elements

Screw - Copy and paste onto your tag and place on the left side of the film half way down the side - duplicate - mirror.

Collar 2 - Resize by 80% and place over the thin rectangle - add a dropshadow.

Brad - Take two of choice and resize by 50% and place to the left over the end of the collar - rotate one by 15% left - Add dropshadow.

Purple Glitter Swirl - Resize by 50% and place on the top of the left side of the film - duplicate - mirror - flip - merge together and drag under your main tube.

Flowers - Resize by 50% and select all - float - defloat - modify - contract by 4 - invert and add 50% noise - select none and add a dropshadow. Place in the top right corner - duplicate - mirror and place in the bottom left corner.

Silver FishBones - Resize by 50% and place on the collar to the right.

Add your copyright and license number and name.

Then to save with a transperent background you just hide the white background - merge visable - delete the white background - then save as .png

Finished
Thankyou

This tut was created in May 2010
Saturday, May 8, 2010

PostHeaderIcon template 37


PostHeaderIcon Template 36


PostHeaderIcon Seaside Seduction

This tutorial is for those that have a working knowledge of Psp.

Supplies needed:
Tube of choice.
I’m using the artwork of Ismael Rac. You have to purchase a license to use his work at AMI

SeaSide Seduction by Sarah and can be purchased at Pimp my Tags with Scraps

Template # 33 by Myself

Ok lets gets started
Open temp and change canvas size to 700 by 700

Delete film and film background

Copy and paste your tube of choice onto your tag and resize by 80% - add Xero-Radiance 229,213,76,133 and add a dropshadow - then delete the excess at the bottom.

Large Squares - Select the black background to the square on the left - copy and paste a paper and close up tube of choice - invert - delete excess - select none - duplicate both the paper and close up tube and mirror both. Merge the close up tubes together and add Xero-Radiance on default and then change the blend mode to Luminance (L) and lower opacity to 50%.

Fill the ramaining shapes with papers from your kit.

Elements

Frame 6 - Resize by 50% and place over the left large square - duplicate - mirror and merge together and add a dropshadow.

Sand - copy - paste onto tag - place over the bottom of the frames - delete excess at either side and drag that layer under your tube.

Message in a bottle - copy and paste onto tag and place under the sand layer.

StarFish - resize by 50% and place at the right where the sand meets the frame - duplicate - mirror - merge together and add a dropshadow.

Shell 1 - Resize by 50% twice and place under the starfish on the left - duplicate - mirror - merge together - add a dropshadow.

Shell 2 - resize by 50% twice and place under the left starfish but the otherside to shell 1 - duplicate - mirror - merge tohether - add dropshadow.

Lighthouse - resize by 50% and place under all the shells on the right.

Pelican - resize by 50% and plave under the shells on the left.

Flower 1 - resize by 50% three times and place over the bow on the left frame - duplicate twice and place the remaining two on the top of the frame.

Net - copy and paste onto tag and resize by 70% - flip and place on the right - drap layer down until ontop of the right circles - duplicate - mirror - merge together and colourise to Hue 140 - Sat 128.

Add your copyright and license number and name.

Then to save with a transperent background you just hide the white background - merge visable - delete the white background - then save as .png
Finished
Thankyou

This tut was created in May 2010

PostHeaderIcon Collab Templates

Here are some collab temps ive done with Linda.. It was alot of fun and you can download them at the Creative Misfits Creations Blog HERE

Friday, May 7, 2010

PostHeaderIcon Dont F*uck With Me



This tutorial is for those that have a working knowledge of Psp.
Supplies needed:
Tube of choice. I’m using the artwork of Keith Garvey. You have to purchase a license to use his work at MPT

Biker Babe kit is made by my awsome friend Tamie and can be purchased at Addictive Pleasures


Template #35 made by me - download from my blog Designz 2 Sinful


Ok lets gets started
Open Temp


Copy and paste your tube onto your temp and place in the middle - add dropshadow.


Add papers to all your shapes in your temp.

Then on your two smaller squares on the left and right add a close up tube of choice and delete excess. Add Xero- Radiance on default and change the blend mode to hardlight and lowe opacity to 50%.

Select inside of the film and add your close up tube again into the film - delete excess and again add Xero-Radiance on default changing the blend mode to hardlight and add blinds 3,10,black.

Elements

Studs - use your selection tool and select the stud on the left - copy and paste onto your - resize by 50% and place at the top of the small left square - duplicate - mirror - merge together - duplicate - flip - merge together and add a dropshadow.

Chain - Resize by 50% and place to the left under the stud - duplicate - mirror - then take chain 2 and resize by 50% - place in between the two other chains and merge all the chains together - drag under the tube.

Skull Charm - Resize by 50% twice and place over where the 2 chains meet on the right - duplicate - mirror - merge together - sharpen and add dropshadow.

Wire - Place onto tag and drag layer til ontop of the bottom squares - duplicate - mirror - flip - merge together and add 50% noise - add dropshadow.

Barbedwire - resize by 80% - place along the bottom of the film.

Ribbon 5 - resize by 50% and place over the top of the barbedwire on the left - duplicate - mirror.

Ribbon 4 - resize by 50% - place to the right on the thin rectangle - duplicate - flip and place on the otherside.

Roses - Resize by 50% - place to the left on the film - duplicate - mirror

Bow3 - resize by 50% twice and place over the stem of the roses on the left - duplicate - mirror.

Glitter 2 - copy and paste onto your tag - place at the top right corner - duplicate - mirror - flip - merge together - and drag to ther bottom .

Add your copyright and license number and name.
Then to save with a transperent background you just hide the white background - merge visable - delete the white background - then save as .png
Finished

Thankyou

This tut was created in May 2010

✿¸.•´ི♥Blinkie♥ྀ `•.¸✿

Photobucket

✿¸.•´ི♥Contact Me♥ྀ `•.¸✿

If you have any troubles or want to send me your results to my tuts then please feel free to email me and ill get back to you as soon as i can. Ty ashleymarlin@bigpond.com

✿¸.•´ི♥Forums I Love♥ྀ `•.¸✿

Photobucket Photobucket Photobucket Photobucket

✿¸.•´ི♥Blog Buds♥ྀ `•.¸✿

Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket Photobucket

✿¸.•´ི♥Followers♥ྀ `•.¸✿